|
Maschio Jolly 150 Mower
- 5' finishing mower
- High quality
- Only 5 left
List $2,075 Clearance $1,450
|
 |
3 Point Hitch Fork Lifts
Sicma Model FL15E
Suitable for low and medium power tractors, they have 3 way control; lift, tilt, & side shift. Single centre lift cylinder.
List $7,155 Clearance $5,975
|
 |
|
Sicma Model FL20E
Suitable for medium and high power tractors, they have two hydraulic side cylinders for maximum visibility. 3 way control; lift, tilt & sife shift.
List $10,645 Clearance $8,675
|
 |
Both Models Have Self Contained Hydraulics With 540 rpm PTO Pump & Oil Reservoir.
| Model |
A |
B |
C |
D |
E |
Max. Capacity |
| FL15E42.3FEM |
38"
|
28"
|
120"
|
18"
|
168"
|
3,300 Lbs
|
| FL20E42.3FEM |
42"
|
30"
|
158"
|
18"
|
168"
|
4,400 Lbs
|
Houle Rock Rake
Model WD-6
For tractors 40 to 65 HP. This model is equipped with 16.5 x 6.5 tires that are designed to pivot 360 degrees, allowing for great maneuvering flexibility. The WD-6 is the smallest in the Houle line of rock rakes. This model is equipped with a 3 point hitch making raising the rake off the ground possible, and allowing the operator to focus completely on other jobs when not using the rake. The gearbox is hermetically sealed to reduce exposure of the internal components to dust. The slip clutch is covered for better protection. The teeth are cut from RT-400 steel, which is 4 times more resistant than regular steel, and are reversible and replaceable.
List $8,295.00 Clearance $
|
 |
Muratori Flail Mower w/ Catcher
Model MT10-RI-155
- Lightweight flail mower for lawns
- Drive shaft
- Hopper for catching grass w/ hydraulic dumping
- Requires 22-25 HP
- 61" cutting width
List $3,995 Clearance $2,195
|

|
ProMow Pro 4000 3-gang Reel Mower
- Recommended for lawns up to 4 acres
- 4' cutting width
- Requires 5 HP to pull
- Each cutting head contains 5 blades
List $2,255 Clearance $995
|

|
ProMow 12' Trophy Reel Mower
- Consisting of seven 21"w x 7" diameter reels
- Each reel has 6 blades
- Made of high carbon steel
- Ground driven, solid steel gear driving internal gears on greasable cast iron wheel with rubber tire
- 10" diameter tires
- Height adjustable cut from 1" to 2 1/2"
- Main frame is made of 2" welded tubular steel
List $15,695 Clearance $5,000
|

|
Caroni Finishing Mower
-
14' cutting width
-
45 HP required
-
3 point hitch
List $15,975
|

|
Tonutti Tines
|
|
RH |
LH |
| A |
5.25" |
5.25"
|
| B |
13" |
13" |
| C |
17.25" |
17.25" |
List $1.95 each Special $0.50 each
|
 |
Vicon Tines
|
|
Short Tine |
Long Tine |
| A |
6" |
6"
|
| B |
10" |
12.5" |
| C |
17.5" |
17.5" |
List $1.95 each Special $0.50 each
|

|
A&L Hay Fluffer
-
Pull type
- Lift & fluff hay to speed drying time
- Hydraulic drive
List $6895 Special $3,460
|

|
Speeco 4' Rear Blade
List $490 Special $260
|

|
|